How To Use Contact Lens For Beginners
Wearing contact lenses has been a passion for people all over the world for as long as it’s been available. A quick search on Google will give you tons of results on how to use contact lens and how does contact lens really work, but this guide is different from all of them.
Unless you wear glasses, your contact lenses are the only thing that help you see. They are tiny pieces of plastic or soft silicone that stick to the surface of your cornea and allow you to see clearly without wearing any glasses. They have grown in popularity in the past 10 years because they are now widely available, safe, and useful for specific conditions. Here are a few things about contact lens for beginners.
How To Use Contact Lens For Beginners
The first time you wear contact lenses, it may feel a little strange. But if you follow these tips, you can get used to them in no time.
Before you put in your contacts:
Wash your hands with soap and warm water. Dry them carefully with a clean towel or paper towel.
Put down everything you’re holding, including your contact case and bottle of solution (if you’re using multipurpose solution).
Open the package of lenses and remove one lens from its tray. Don’t touch the surface of the lens. If there is any dust or lint on it, blow gently on the lens until it’s completely clear. Don’t use your mouth to blow on the lens because this can introduce bacteria into your eyes.
Put on a pair of disposable gloves if they come with your lens case (they are not necessary but are convenient). This will help keep germs away from your hands as well as prevent contaminating the lenses as you handle them.
Look at the inside surface of each lens as you turn it over in your hand: It should be smooth without any bumps or indentations that could tear up your eye when wearing it for long periods of time (more than four hours).
You may be a little nervous about using contact lenses for the first time. But don’t worry too much. It’s easy to get the hang of wearing contacts. Just follow these simple steps:
Clean your hands before handling your lenses. Use soap and warm water, and dry them with a clean towel.
Open the package carefully to avoid damaging it or accidentally touching the lens itself.
Once you’ve opened the package, remove one lens from its sterile wrapping and place it on a clean surface like a table or countertop. Be careful not to touch the surface of the lens with anything that might have germs on it.
Put your lens on by placing it directly over your eye opening, placing one side down first and then gently pressing until it clicks into place on your eye’s surface. You should feel some resistance but no pain as you press down; if you experience any pain in this process, stop immediately!
Once you have both lenses in place, keep them moistened with solution at all times while they’re inside your eyes; this will help prevent them from drying out prematurely and causing damage to your eyesight (and possible infection). To do this, simply fill up a cup or small bowl of water.
How To Use Contact Lens Solution
You can use contact lens solution to clean and store your contacts. It’s important to use the right kind of solution, though.
Contact lens solutions come in different types, based on the type of contact lens you wear. If you’re not sure which solution is best for you, ask your eye doctor or optometrist.
Use contact lens solution as directed by your eye doctor or optometrist. Some solutions are used for daily cleaning and some are used for a monthly deep cleaning.
How to Clean Your Contacts
Wash hands with soap and water before handling your contacts. Never touch the inside of your lenses with anything other than your fingertips.
Remove the contact by gently pulling it toward the outer edge of your eye while holding onto the opposite side of the lens. Remove both lenses at once so you don’t mix them up when putting them back into their case. Wash your hands again after handling each lens separately.
Rinse both sides of each contact with fresh tap water for at least 20 seconds before placing it back into its case (or another container). Tap water will help remove any debris from between the contact lens surfaces and rinse away any soap residue that could be harmful to eyes if not completely.
Contact lens solutions contain preservatives that can cause reactions like stinging or burning, so don’t be surprised if you experience these symptoms during the first week or two of using your contact lenses. These reactions are usually temporary and can be minimized by using a fresh solution every night. If your eye becomes irritated, try a different brand of solution or contact lens case.
The most common problem is dryness, which can cause itching and redness in your eye. It’s important to wear a fresh pair of contacts every night and avoid touching or rubbing them against anything, especially if they’re not disinfected yet! You should also make sure you have enough moisture in the air around you — an air conditioner can help with this.
How To Stop Blinking When Putting In Contacts
Contact lens for the first time is a big step for many people. It takes some time to get used to contact lenses, but with practice, it’s easy to get comfortable with them.
Here are some tips on how to use contact lenses for the first time:
Wash your hands with soap and water before handling your lenses. This will help prevent any infections from spreading from your hands onto the lens.
Use a new pair of disposable contact lenses for each eye if you have never worn contacts before. This way, you can be sure that all of your eyes are getting the correct prescription and fit.
To insert the lens, hold it up against one of your eyes and look at it through the top opening of the package (the side without any writing). If you can see through it clearly without straining or blinking excessively, then it is ready to be placed into your eye. If not, then wait 30 seconds before trying again so that the lens can settle into its proper place in the solution inside of its packaging.
Gently squeeze out any excess solution from around your contact lens before placing it into your eye. Be careful not to touch anything else with your fingers while doing this or else they could contaminate everything around them with bacteria.
If you wear contact lenses, putting them in takes some practice. You’ll want to follow these tips to get the most out of your contacts and avoid problems:
Wash your hands and clean your fingernails before putting in contacts. This is important for two reasons — first, it’s just good hygiene and second, you don’t want to accidentally scratch or poke yourself with a dirty fingernail while trying to put on your contacts.
Gently pull down your lower lid with one hand and place the lens with the other. It’s okay if you feel a little tugging as you do this; it should not hurt at all. Never try to force a lens into place if it doesn’t seem to fit right away — you could damage your eyes or break the lens!
Let go of your lower lid when the lens is in place so that it stays there. Repeat this process for each eye (if you’re wearing two different prescriptions).